Category: piperidines

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3612-20-2,1-Benzylpiperidin-4-one,as a common compound, the synthetic route is as follows.

Sodium hydride (4.20 g, 175.0 mmol) was suspended in THF (200 mL), and a solution of the piperidone (18.9 g, 99.9 mmol) and methyl iodide (17.9 g, 126.1 mmol) in THF (20 mL) was added dropwise at room temperature over 5 minutes. The mixture was then heated to 60 C and stirred for 5 hours. The reaction was then filtered and the filtrate concentrated. The concentrate was poured into 150 mL of water and extracted with 120 mL portions of EtOAc three times. The extract was washed with brine, dried, and concentrated. The crude product was purified by column chromatography (gradient: 12% EtOAc in hexanes to 50% EtOAc in hexanes over 1200 mL). Both mono and di methylation occurred. Separation of both isomers by chromatography was quite facile. 3.53 g of the dimethylated product (16%) was obtained. MS (EI) : m/z 218.1 (M + 1). 5.91 g (29%) of the monomethylated product was obtained. MS (EI) : m/z 204.0 (M + 1)., 3612-20-2

As the paragraph descriping shows that 3612-20-2 is playing an increasingly important role.

Reference：
Patent; WARNER-LAMBERT COMPANY LLC; WO2005/26145; (2005); A2;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

19099-93-5, 1-Cbz-Piperidin-4-one is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[32.2] To a stirred solution of the product (130 g) obtained in preparation 1 in methanol (500 ml) at 0C., sodium borohydride (25 g) was added and the reaction mixture was stirred at the same temperature for 1h. At the end of this time, pH was adjusted to 6.5 – 7.0 using AcOH and the solvent was removed under reduced pressure. The residue was diluted with EtOAc (400 ml) was washed with water, dried (Na2SO4) and the solvent was removed under reduced pressure to get 131 g (100%) of the title compound as a syrupy liquid. 1H NMR (CDCl3, 200MHz): d 1.5 (m,2H), 1.85 (m.2H), 3.15 (m,2H), 3.9 (m, 3H), 5.11 (s, 2H), 7.35 (bs, 5H).

19099-93-5, 19099-93-5 1-Cbz-Piperidin-4-one 643496, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Dr. Reddy’s Laboratories Ltd.; EP981526; (2004); B1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25137-01-3,(R)-Ethyl piperidine-3-carboxylate,as a common compound, the synthetic route is as follows.

A mixture of 4-fluoro-1-naphthonitrile (300 mg), (R)-ethyl nipecotate (551 mg), potassium carbonate (485 mg), and dimethylsulfoxide (3.0 mL) was stirred at 100 C for 3 hours. After cooling to room temperature, the reactant was poured into water, and then extracted with ethyl acetate. The extracts were washed with water, dried and concentrated. The obtained residue was purified by silica gel column chromatography to obtain ethyl (3R)-1-(4-cyano-1-naphthyl)-3-piperidinecarboxylate (451 mg) (Compound 32). [?]D=-56.4 (c=0.475, MeOH).1H-NMR (200 MHz, CDCl3) ?: 1.26 (3H, t, J=7.0 Hz), 1.70-2.03 (3H, m), 2.14-2.20 (1H, m), 2.79-2.95 (2H, m), 3.07 (1H, t, J=10.6 Hz), 3.35-3.41 (1H, m), 3.57-3.62 (1H, m), 4.17 (2H, q, J=7.0 Hz), 7.06 (1H, d, J=8.2 Hz), 7.54-7.70 (2H, m), 7.84 (1H, d, J=8.2 Hz), 8.13-8.23 (2H, m). IR (KBr) 2216, 1730, 1574 cm-1, 25137-01-3

25137-01-3 (R)-Ethyl piperidine-3-carboxylate 185582, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Takeda Pharmaceutical Company Limited; EP1553074; (2005); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.10315-06-7,Methyl 1-benzylpiperidine-4-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: A 0.2 M solution of the corresponding methyl ester in aq NH4OH (28-30%) was stirred at r.t. for 16 h. The solvent was evaporated to affordthe amide, which was, in some cases, purified by silica gel chromatography. The known amides 3, 33 5a,34 5b, 6c 5h,35 11a,36 11b,37 11c,3611e,38 11h,4 11i,39 11j,39 13,40 14,41 20,42 and 2343 were synthesized following the general procedure described above. Compound 5e was synthesized following the literature.44

10315-06-7, 10315-06-7 Methyl 1-benzylpiperidine-4-carboxylate 11436222, apiperidines compound, is more and more widely used in various fields.

Reference：
Article; Keita, Massaba; Vandamme, Mathilde; Paquin, Jean-Francois; Synthesis; vol. 47; 23; (2015); p. 3758 – 3766;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

122860-33-7, Benzyl 4-(hydroxymethyl)piperidine-1-carboxylate is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step C Preparation of benzyl 4-[(2-ethoxy-2-oxoethoxy)methyl]-1-piperidine carboxylate Dissolved the alcohol (3.5 g, 13.35 mmol) from Step B in CH2Cl2 (25 ml), then added rhodium diacetate dimer (30 mg, 0.067 mg) to the solution, followed by the dropwise addition of ethyl diazoacetate (1.5 ml, 14.7 mmol). N2 gas evolved as the reaction proceeded. Filtered the reaction through celite and removed solvent on the rotary evaporator, then purified by flash chromatography to yield the pure title compound (3.5 g, 78%).

122860-33-7, The synthetic route of 122860-33-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Scarborough, Robert M.; Mehrotra, Mukund; Pandey, Anjali; Smyth, Mark; US2003/55244; (2003); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.72551-53-2,Ethyl 1-benzylpiperidine-3-carboxylate,as a common compound, the synthetic route is as follows.

72551-53-2, Step 1: l-Benzylpiperidine-3-carbonyl chloride hydrochloride; [00273] Hydrochloric acid (20 % aq, 100 mL) was added to ethyl l-benzylpiperidine-3- carboxylate (14.2 g, 57.4 mmol) and the mixture heated at reflux for 4 h. The reaction was cooled and concentrated in vacuo to give l-benzylpiperidine-3-carboxylic acid as a pale yellow solid. This solid was dissolved in thionyl chloride and the resulting solution stirred at room temperature for 1 h. Thionyl chloride was removed in vacuo and the resulting solid was slurried in THF and azeotroped to afford the title compound as a pale yellow solid which was used without further purification (17.0 g, quant.).

72551-53-2 Ethyl 1-benzylpiperidine-3-carboxylate 2736370, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; GALAPAGOS N.V.; WO2008/55959; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

220394-97-8, 1-Boc-4-(Cbz-amino)piperidine is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of r/-butyl 4-(benzyloxycarbonylamino)piperidine-l -carboxylate (2.13 g, 6.38 mmol) in methanol (20 mL) was added 4 N hydrogen chloride in dioxane (8.0 mL, 31.8 mmol) in a dropwise manner at room temperature, then heated to 40 C for 1 hour. The mixture was concentrated and dried to give benzyl piperidin-4-ylcarbamate hydrochloride as a white solid, which was used without further purification. MS (EI) for C |3H,8N202: 235.0 (MH+).

220394-97-8, The synthetic route of 220394-97-8 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; EXELIXIS, INC.; RICE, Kenneth, D.; FOSTER, Paul; WO2014/160177; (2014); A2;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

189333-49-1, 3-Benzyl-3,9-diazaspiro[5.5]undecane is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

3-Benzyl-3,9-diazaspiro[5.5]undecane (6.14 mmol) is dissolved in 2.5% acetic acid in DCM (24 mL) at 0 C. and treated dropwise with cyclobutanone (9.21 mmol). The mixture is stirred for 30 min and then sodium triacetoxyborohydride (9.21 mmol) is added in portions. The reaction mixture is stirred at rt overnight, basified with saturated sodium carbonate solution and extracted with DCM. The combined extracts are washed with water, and then brine, dried over anhydrous Na2SO4 and concentrated in vacuo to afford the title compound. LC-MS (Method 1)=299.19; RT=1.26 min., 189333-49-1

The synthetic route of 189333-49-1 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Xu, Yuelian; Caldwell, Timothy M.; Xie, Linghong; Chenard, Bertrand L.; US2008/247964; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.138022-04-5,tert-Butyl methyl(piperidin-4-ylmethyl)carbamate,as a common compound, the synthetic route is as follows.

To a solution of tert-butyl N-methyl-N-(4-piperidylmethyl)carbamate (119 mg, 522 umol, CAS138022-04-5) and 1-(2,6-dioxo-3-piperidyl)-3-methyl-2-oxo-benzimidazole-5-carbaldehyde (150 mg, 522 umol, Intermediate SK) in a mixed solvents of DMF (1.2 mL) and THF (2.4 mL) was added HOAc until the pH=5-6. After the reaction mixture was stirred at 10 C. for 1 hr, then NaBH(OAc)3 (221 mg, 1.04 mmol) was added. Then the reaction mixture was stirred at 10 C. for 48 hrs. On completion, the reaction mixture was quenched by H2O (0.5 mL), filtered and the filtrate was concentrated in vacuo to give a residue. The residue was purified by reverse phase (0.1% FA condition) to give the title compound (230 mg, 88% yield) as a white solid. 1H NMR (400 MHz, CDCl3) delta 8.53 (s, 1H), 7.21 (d, J=16.0 Hz, 1H), 7.01 (J=8.0 Hz, 1H), 6.76 (d, J=8.0 Hz, 1H), 5.24 (dd, J=5.2, 12.8 Hz, 1H), 4.06-3.80 (m, 2H), 3.43 (s, 3H), 3.24 (d, J=8.0 Hz, 2H), 3.13 (s, 2H), 2.98-2.87 (m, 1H), 2.87 (s, 3H), 2.79 (d, J=4.8 Hz, 1H), 2.77-2.63 (m, 1H), 2.57-2.39 (m, 1H), 2.37-2.16 (m, 2H), 1.91-1.78 (m, 1H), 1.78-1.60 (m, 2H), 1.60-1.48 (m, 1H), 1.44 (s, 9H); LC-MS (ESI+) m/z 500.4 (M+H)+.

138022-04-5, As the paragraph descriping shows that 138022-04-5 is playing an increasingly important role.

Reference：
Patent; Kymera Therapeutics, Inc.; Mainolfi, Nello; Ji, Nan; Kluge, Arthur F.; Weiss, Matthew M.; Zhang, Yi; (1443 pag.)US2019/192668; (2019); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.710972-40-0,tert-Butyl 4-((2-methoxyethyl)amino)piperidine-1-carboxylate,as a common compound, the synthetic route is as follows.

111 { l-[2-(lH-Indazol-4-ylV4-morpholin-4-yl-thienor3,2-d”|pyrimidin-6-ylmethyl1- piperidin-4-vU-(2-methoxy-ethyl)-(2,2,2-trifluoro-ethyl)-amine. Via [l-(2-Chloro-4-mophiholin-4-yl-thieno[3,2-d]pyrimidin-6-ylmethyl)-piperidin-4- yl]-(2-methoxy-ethyl)-(2,2,2-trifluoro-ethyl)-amine, prepared from (2-methoxy- ethyl)-piperidin-4-yl-(2,2,2-trifluoro-ethyl)-amine.Amine preparation: l-BOC-4-piperidinone (2.0Og) and 2-methoxyethylamine (872muL) were stirred together in MeOH (2OmL) at room temperature overnight. Sodium borohydride (760mg) was then added portionwise and the reaction mixture was allowed to stir further at ambient temperature. After 16 h, the solvent was removed in vacuo, the residue was diluted with DCM, washed with brine, dried (MgSO4) and the solvent removed in vacuo. The residue was purified using flash chromatography to yield 4-(2-methoxy-ethylamino)-piperidine-l-carboxylic acid tert-butyl ester as a colourless oil (1.69g).To a solution of 4-(2-methoxy-ethylamino)-piperidine-l-carboxylic acid tert- butyl ester (500mg) in DCM (5mL) and triethylamine (540muL) was added trifluoroacetic anhydride (548muL). The reaction mixture was stirred at room temperature overnight, diluted with DCM, washed with brine, dried (MgSO4) and the solvent removed in vacuo. The residue was purified using flash chromatography to yield 4-[(2-methoxy-ethyl)-(2,2,2-trifluoro-acetyl)-amino]-piperidine- 1 -carboxylic acid tert-huy ester as an oil (685mg).To a solution of 4-[(2-methoxy-ethyl)-(2,2,2-trifiuoro-acetyl)-amino]- piperidine-1 -carboxylic acid tert-butyl ester (685mg) in dry THF (7mL) was added borane-methyl sulfide complex (405uL) at O0C under inert atmosphere. The reaction mixture was refluxed for 3 h, and then stirred at room temperature overnight, quenched with MeOH, diluted with DCM, washed with brine, dried (MgSO4) and the solvent removed in vacuo. The residue was purified using flash chromatography to yield 4-[(2-methoxy-ethyl)-(2,2,2-trifluoro-ethyl)-amino]-piperidine-l -carboxylic acid tert-huy ester as an oil (635mg). Treatment of this compound with HCl in DCM/MeOH furnished the desired amine, isolated as the hydrochloride salt. EPO 1H NMR (400MHz, CDCl3) 1.55-1.64 (2H, m), 1.76-1.82 (2H, m), 2.12-2.18 (2H, m), 2.58-2.62 (IH, m), 2.86 (2H, t, J=6.3Hz), 3.03-3.08 (2H, m), 3.20 (2H, q, J=9.4Hz), 3.33 (3H, s), 3.45 (2H, t, J=6.4Hz), 3.84 (2H, s), 4.00 (4H, t, J=5.1Hz), 7.22 (IH, s), 7.49 (IH, t, J=7.2Hz), 7.48 (IH, d, J=8.3Hz), 8.28 (IH, d, J=7.1Hz), 8.90 (IH, s), 10.00 (IH, br); MS (ESI+) 590 (MH+)., 710972-40-0

710972-40-0 tert-Butyl 4-((2-methoxyethyl)amino)piperidine-1-carboxylate 43652134, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; PIRAMED LIMITED; WO2006/46031; (2006); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem