Tag: M.W:200-300

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.236406-22-7,1-Boc-4-(Aminomethyl)-4-methylpiperidine,as a common compound, the synthetic route is as follows.

Step 4. Synthesis of 4-benzyloxycarbonylaminomethyl-1-t-butoxycarbonyl-4-methylpiperidine To 6 ml of a tetrahydrofuran solution of 4-aminomethyl-1-t-butoxycarbonyl-4-methylpiperidine, obtained by Step 3, 1 ml of diisopropylehtylamine and 0.3 ml of benzyloxycarbonyl chloride were added successively, followed by stirring for 1 hour at the same temperature. The reaction mixture was diluted with ethyl acetate, washed successively with water and brine, and dried over anhydrous sodium sulfate. The solvent was distilled off under reduced pressure, and 324 mg of the crude title compound was obtained by purifying the resulting residue by silica gel column chromatography (eluding solvent: hexane/ethyl acetate=5/1~2/1)., 236406-22-7

The synthetic route of 236406-22-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Banyu Pharmaceutical Co Ltd; US6140333; (2000); A;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.358789-72-7,4-((1-Methylpiperidin-4-yl)oxy)aniline,as a common compound, the synthetic route is as follows.

Example 11 3-(2-amino-7,8-dihydropyrido[4,3-d]pyrimidin-6(5H)-yl)-N-(4-((1-methylpiperidin-4-yl)oxy)phenyl)benzamide A mixture of 3-(2-amino-7,8-dihydropyrido[4,3-d]pyrimidin-6(5H)-yl)benzoic acid (41 mg, 0.15 mmol), N,N-diisopropylethylamine (0.105 mL, 0.60 mmol), and HBTU (63 mg, 0.165 mmol) in 1.5 mL DMF was briefly warmed to approx. 50 C. to dissolve solids, then continued stirring at room temperature. After 10 minutes 4-((1-methylpiperidin-4-yl)oxy)aniline (46 mg, 0.225 mmol) was added and the reaction continued at room temperature for 3 hours. The reaction mixture was partitioned between EtOAc and aqueous NaHCO3 solution, the EtOAc layer washed with H2O, brine, dried with anhydrous Na2SO4 and rotary evaporated. The resulting solid was triturated with EtOAc to give the title compound as an off-white solid (48 mg, 70%). 1H NMR (DMSO-d6) delta: 10.02 (s, 1H), 8.13 (s, 1H), 7.60-7.67 (m, 2H), 7.49 (s, 1H), 7.30-7.40 (m, 2H), 7.20 (dt, J=7.7, 2.0 Hz, 1H), 6.90-6.96 (m, 2H), 6.40 (s, 2H), 4.28 (s, 2H), 4.26-4.35 (m, 1H), 3.64 (t, J=5.9 Hz, 2H), 2.77 (t, J=5.9 Hz, 2H), 2.56-2.66 (m, 2H), 2.17 (s, 3H), 2.10-2.21 (m, 2H), 1.86-1.97 (m, 2H), 1.55-1.69 (m, 2H)., 358789-72-7

As the paragraph descriping shows that 358789-72-7 is playing an increasingly important role.

Reference：
Patent; ALLERGAN, INC.; Hull, III, Clarence E.; Malone, Thomas C.; US2013/237538; (2013); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1104083-27-3,tert-Butyl 3-hydroxy-3-methylpiperidine-1-carboxylate,as a common compound, the synthetic route is as follows.

To a solution of tert-butyl 3-hydroxy-3-methylpiperidine-1-carboxylate (0.3 g, 1.39 mmol) in MeOH (5 mL) was added 4.0 M HC1 in Dioxane (1.73 mL) at 0 C. The reaction mixture was stirred at room temperature for 4 h. After completion, volatiles were removed under reduced pressure to afford 0.15 g of 3 -methylpiperidin-3 -ol hydrochloride (Yield = 71%)., 1104083-27-3

The synthetic route of 1104083-27-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; THE BROAD INSTITUTE, INC.; MASSACHUSETTS INSTITUTE OF TECHNOLOGY; HOLSON, Edward; WAGNER, Florence, Fevrier; WEIWER, Michel; SCOLNICK, Edward; PALMER, Michelle; DORDEVIC, Luka; LEWIS, Michael; PAN, Jennifer, Q.; ZHANG, Yan-Ling; XU, Qihong; (425 pag.)WO2016/100940; (2016); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

1062580-52-2, (3R,4R)-1-Benzyl-N,4-dimethylpiperidin-3-amine dihydrochloride is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

100 gm of 4-Chloro-7H-pyrrolo[2,3-d] pyrimidine and 205 gm of (3R,4R)-l-benzyl-N-4- dim ethyl piperidin-3-amine dihydrochloride, 216 gm of Potassium carbonate was dissolved in water and raise the temperature of about 90.0C. After the end of the reaction, extract the product into Toluene and filter off. Distill off the solvent completely under vacuum and isolated the product in Isopropyl alcohol. Filtered the material and dried to get 145 gm of N-((3R,4R)-l-benzyl-4-methylpiperidin-3-yl)-N- methyl-7H-pyrrolo[2,3-d]pyrimidin-4-amine., 1062580-52-2

The synthetic route of 1062580-52-2 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; PHALANX LABS PRIVATE LIMITED; AVIRNENI, Sri Ramakrishna; (26 pag.)WO2018/172821; (2018); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

109384-19-2, tert-Butyl 4-hydroxypiperidine-1-carboxylate is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of ieri-butyl 4-hydroxypiperidine-1-carboxylate (10.9 g, 49.7 mmol, 1 .0 eq) in EtOAc (40 mL) was added a saturated solution of HCI in EtOAc (10 mL), and the resulting mixture was stirred at room temperature overnight. The mixture was concentrated to give the title compound (7.0 g) as a white solid

109384-19-2, As the paragraph descriping shows that 109384-19-2 is playing an increasingly important role.

Reference：
Patent; CTXT PTY LTD; BERGMAN, Ylva Elisabet; FOITZIK, Richard Charles; MORROW, Benjamin Joseph; CAMERINO, Michelle Ang; WALKER, Scott Raymond; LAGIAKOS, H. Rachel; FEUTRILL, John; STEVENSON, Graeme Irvine; STUPPLE, Paul Anthony; (222 pag.)WO2016/34673; (2016); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

534595-51-2,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.534595-51-2,1-Boc-4-(isopropylamino)piperidine,as a common compound, the synthetic route is as follows.

To a 0 C. solution of tert-butyl 4-(isopropylamino)piperidine-1-carboxylate (1.2 g, 5.19 mmol) in CH2Cl2 (18 mL) was added Et3N (1.44 mL, 10.38 mmol) followed by acetyl chloride (0.55 mL, 7.78 mmol). The resulting solution was stirred for 2.5 hours, then concentrated in vacuo. The material was purified by flash chromatography on silica gel, eluting with 0% to 5% of EtOAc/CH2Cl2, to afford tert-butyl 4-(N-isopropylacetamido)piperidine-1-carboxylate (0.88 g, 59%).

The synthetic route of 534595-51-2 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Resverlogix Corp.; Hansen, Henrik C.; (96 pag.)US9238640; (2016); B2;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

24666-55-5, Benzyl (2,6-dioxopiperidin-3-yl)carbamate is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

3-N-benzyloxycarbonylamino-2,6-dioxopiperidine 40 g (0.153 mol) was sequentially added to the hydrogenation vessel.10percent Pd/C 4g, methanol 2L, 2mol/L hydrochloric acid 1.5L, a certain H2 pressure, kept at 25 ° C for 5 h, filtered after pressure relief, the filtrate was evaporated to dryness, and then 500 ml of methanol was added.After stirring for 0.5 h, it was filtered to give a white solid.The yield was 90.5percent., 24666-55-5

24666-55-5 Benzyl (2,6-dioxopiperidin-3-yl)carbamate 2735493, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Shijiazhuang Duen Pharmaceutical Technology Co., Ltd.; Fang Yu; Du Yumin; (8 pag.)CN109776493; (2019); A;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118511-81-2,1-(Piperidin-4-yl)-1H-indole,as a common compound, the synthetic route is as follows.

PREPARATION 3 1-(1-Ethyl-piperidin-4-yl)-1H-indole To a solution of 1-piperidin-4-yl-1H-indole (0.6 g, 3 mmol) in 5 mL of dry ethanol was added anhydrous potassium carbonate (680 mg, 4.9 mmol). After stirring for 15 minutes at ambient temperature, ethyl p-toluenesulfonate (0.48 mL,4.5 mmol) was added. The reaction was heated under reflux for 24 hours with stirring, quenched with water, extracted with methylene chloride (2*), dried and evaporated to give a residue. The residue was chromatographed on silica gel with toluene/acetone (50:50) to yield 360 mg straw colored material (53% of theory).

118511-81-2, The synthetic route of 118511-81-2 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Eli Lilly and Company; US5545636; (1996); A;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1180112-41-7,tert-Butyl 1,7-diazaspiro[3.5]nonane-7-carboxylate,as a common compound, the synthetic route is as follows.

A suspension of tert-butyl 1,7-diazaspiro[3.5]nonane-7-carboxylate (0.5 g, 2.21 mmol) and 10% palladium on carbon (0.235 g, 0.221 mmol) in EtOH/MeCN (2:1, 5 mL) was prepared and stirred at RT under 2 atmospheres H2for 22 h. The reaction mixture was filtered through Celite, washing with MeOH (50 mL). The filtrate was concentrated in vacuo and the resulting residue was purified by chromatography on silica gel (12 g column, 0-15% (0.7 M Ammonia/MeOH)/DCM) to afford tert-butyl 1-ethyl-1,7- diazaspiro[3.5]nonane-7-carboxylate. This was dissolved in TFA/DCM (1:1, 10 mL) and stirred at RT for 90 min. The reaction was concentrated in vacuo and the resulting residue was loaded onto a column of SCX (10 g) in MeOH. The column was washed with MeOH and the product was eluted with 7 M ammonia in MeOH. The ammoniacal solution was concentrated in vacuo to afford the title compound (0.242 g, 70%) as a yellow oil.1H NMR (DMSO-d6) d 3.01 (t, J = 7.0 Hz, 2H), 2.85 – 2.75 (m, 2H), 2.42 – 2.32 (m, 4H), 1.76 (t, J = 7.0 Hz, 2H), 1.65 – 1.57 (m, 2H), 1.41 (td, J = 12.4, 4.4 Hz, 2H), 0.84 (t, J = 7.2 Hz, 3H). One exchangeable proton not observed.

1180112-41-7, The synthetic route of 1180112-41-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; INFLAZOME LIMITED; MILLER, David; MACLEOD, Angus; THOM, Stephen; MCPHERSON, Christopher G.; ALANINE, Thomas; CARRILLO ARREGUI, Jokin; CIANA, Claire-Lise; SHANNON, Jonathan; VAN WILTENBURG, Jimmy; DEN HARTOG, Jacobus Antonius Joseph; (603 pag.)WO2019/211463; (2019); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.78190-11-1,1-[(Benzyloxy)carbonyl]-3-piperidinecarboxylic acid,as a common compound, the synthetic route is as follows.,78190-11-1

A mixture of piperidine-1,3-dicarboxylic acid 1-benzyl ester (3.0 g, 11.4 mmol), triethylamine (4.62 g, 45.6 mmol), and 1-propanphosphonic acid anhydride (3.63 g, 11.4 mol, 6.80 mL of a 50% w/w solution in ethyl acetate) and 2 aminoacetophenone hydrochloride (1.96 g, 11.4 mmol) in THF (55 mL) was stirred at rt for 16 h. The mixture was then concentrated, and the residue was dissolved in CH2Cl2. The solution was washed with 1 M NaOH, dried through cotton, and concentrated. Silica gel chromatography eluding with 1:2 hexanes/ethyl acetate gave the title compound as a pale yellow solid.

As the paragraph descriping shows that 78190-11-1 is playing an increasingly important role.

Reference：
Patent; Pfizer Inc; US2006/19975; (2006); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem