Category: 53617-36-0

53617-36-0, 1-Methyl-4-(piperidin-4-yl)piperazine is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2g) (R)-1-(4-amino-3-methyl-5-nitro-benzyl)-2-[4-(4-methyl-piperazin-1-yl)-piperidin-1-yl]-2-oxo-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate A solution of 780 mg (1.5 mmol) (R)-2-(4-amino-3-methyl-5-nitro-phenyl)-1-carboxy-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate, 520 mg (1.6 mmol) TBTU, 350 muL (2.1 mmol) ethyldiisopropylamine in 30 mL THF and 5 mL DMF was stirred for 1 h at RT, then combined with 300 mg (1.6 mmol) 1-methyl-4-piperidin-4-yl-piperazine and stirred for 4 h at RT. The reaction solution was combined with 100 mL semisaturated NaHCO3 solution and extracted twice with 50 mL EtOAc. The organic phases were dried over Na2SO4, filtered and evaporated down i.vac. The residue was dissolved in a little DCM, combined with diethyl ether, the precipitate was suction filtered and dried. Yield: 1.0 g (97percent of theory) ESI-MS: (M+H)+=677 Rf=0.46 (Polygram-Alox, DCM/MeOH 25:1)

53617-36-0, 53617-36-0 1-Methyl-4-(piperidin-4-yl)piperazine 795707, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Boehringer Ingelheim International GmbH; US2005/256099; (2005); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.53617-36-0,1-Methyl-4-(piperidin-4-yl)piperazine,as a common compound, the synthetic route is as follows.

7g) (R)-1-(8-methyl-imidazo[1.5-a]pyridin-6-ylmethyl)-2-[4-(4-methyl-piperazin-1-yl)-piperidin-1-yl]-2-oxo-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate A solution of 115 mg (0.18 mmol) (R)-1-carboxy-2-(8-methyl-imidazo[1,5-a]pyridin-6-yl)-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate, 70 mg (0.22 mmol) TBTU and 40 muL (0.29 mmol) triethylamine in 10 mL THF and 1 mL DMF was stirred for 1 h at RT. Then 50 mg (0.27 mmol) 1-methyl-4-piperidin-4-yl-piperazine were added and the reaction mixture was stirred overnight at RT. To complete the reaction another 70 mg TBTU and 50 mg 1-methyl-4-piperidin-4-yl-piperazine were added, the mixture was stirred for a further 65 h at RT and again combined with 70 mg TBTU, 50 mg 1-methyl-4-piperidin-4-yl-piperazine, 40 muL triethylamine and 1 mL DMF and stirred overnight at RT. 10 mL semisaturated NaHCO3 solution were added to the reaction mixture, it was extracted twice with 30 mL EtOAc and the combined organic phases were dried over Na2SO4. After the desiccant and solvent had been eliminated the residue was purified by HPLC. The fractions containing the product were combined and lyophilised. Yield: 49 mg (29percent of theory) ESI-MS: (M+H)+=657 retention time (HPLC): 2.0 min (method B), 53617-36-0

As the paragraph descriping shows that 53617-36-0 is playing an increasingly important role.

Reference：
Patent; Boehringer Ingelheim International GmbH; US2005/256099; (2005); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.53617-36-0,1-Methyl-4-(piperidin-4-yl)piperazine,as a common compound, the synthetic route is as follows.,53617-36-0

1k) tert.-butyl 7-methyl-5-{(R)-3-[4-(4-methyl-piperazin-1-yl)-piperidin-1-yl]-3-oxo-2-[4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carbonyloxy]-propyl}-indazol-1-carboxylate A solution of 440 mg tert.-butyl 5-{(R)-2-carboxy-2-[4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carbonyloxy]-ethyl}-7-methyl-indazol-1-carboxylate, 256 mg (0.8 mmol) TBTU, 146 muL (1.0 mmol) triethylamine and 147 mg (0.8 mmol) 1-methyl-4-piperidin-4-yl-piperazine in 8 mL DMF was stirred for 2 h at RT. The reaction solution was filtered through an injection filter and purified directly by HPLC without any further working up. The fractions containing the product were combined, evaporated down i.vac., made alkaline with 15percent K2CO3 solution, extracted three times with 30 mL DCM, the combined organic phases were dried over Na2SO4 and the solvent was eliminated i. vac. Yield: 160 mg (28percent of theory) ESI-MS: (M+H)+=757 retention time (HPLC): 6.6 min (method A)

53617-36-0 1-Methyl-4-(piperidin-4-yl)piperazine 795707, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Boehringer Ingelheim International GmbH; US2005/256099; (2005); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

53617-36-0, 1-Methyl-4-(piperidin-4-yl)piperazine is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

53617-36-0, (Example 20) N-(3-Fluoro-4-{[2-({[2-(4-methylpiperazin-1-yl)piperidin-1-yl]carbonyl}amino)pyridin-4-yl]oxy}phenyl)-N’-(4-fluorophenyl)clopropane-1,1-dicarboxamide To a solution of [4-(2-fluoro-4-{[1-(4-fluorophenylcarbamoyl)cyclopropanecarbonyl]amino}phenoxy)pyridin-2-yl]-N-(phenoxycarbonyl)carbamic acid phenyl ester (66 mg) in N,N-dimethylformamide (1.0 ml) was added 1-methyl-4-(piperidin-4-yl)piperazine (73.3 mg) at room temperature, followed by stirring overnight. The reaction mixture was partitioned between ethyl acetate and water. The organic layer was washed with a saturated aqueous solution of ammonium chloride and brine in this order, and dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. The resultant residue was purified by silica gel column chromatography (Fuji Silysia NH, eluent; ethyl acetate, then ethyl acetate:methanol = 95:5). Fractions containing the target compound were concentrated under reduced pressure. A solid was precipitated by addition of diethyl ether:heptane = 1:3 to the resultant residue. The solvent was removed under reduced pressure. The solid residue was dried under reduced pressure to provide the titled compound as white powder (60.1 mg, 95 percent). 1H-NMR Spectrum (CDCl3) delta (ppm): 1.40-2.00 (9H, m), 2.29 (3H, s), 2.35-2.70 (8H, m), 2.88 (2H, m), 4.00-4.10 (2H, m), 6.56 (1H, dd, J = 2.4, 5.6 Hz), 7.00-7.30 (5H, m), 7.40-7.50 (2H, m), 7.56 (1H, d, J = 2.4 Hz), 7.68 (1H, dd, J = 2.4, 12.0 Hz), 8.05 (1H, d, J = 5.6 Hz), 8.63 (1H, brs), 9.54 (1H, brs). ESI-MS (m/z): 656 [M+Na]+.

53617-36-0 1-Methyl-4-(piperidin-4-yl)piperazine 795707, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Eisai R&D Management Co., Ltd.; EP1889836; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

53617-36-0, 1-Methyl-4-(piperidin-4-yl)piperazine is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,53617-36-0

(Example 101) N-(2,5-Difluoro-4-{[4-({[-(4-methylpiperazin-1-yl)piperidin-1-yl]carbonyl}amino)pyrimidin-6-yl]oxy}phenyl)-N’-(4-fluorophenyl)cyclopropane-1,1-dicarboxamide N- {4-[(4-Aminopyrimidin-6-yl)oxy]-2,5-difluorophenyl}-N’-(4-fluorophenyl)cyclopropane-1,1-dicarboxamide (100 mg) was dissolved in tetrahydrofuran (5 ml) under a nitrogen atmosphere, N,N-diisopropylethylamine (0.100 ml) and phenyl chloroformate (0.070 ml) were added dropwise at room temperature, followed by stirring for 15 min. The reaction mixture was partitioned between ethyl acetate and water. The organic layer was separated, washed with a saturated aqueous solution of sodium hydrogencarbonate and brine, dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. The residue was dissolved in N,N-dimethylformamide (2.5 ml). To the solution was added 1-methyl-4-(piperidin-4-yl)piperazine (250 mg) at room temperature, followed by stirring for 25 hr. The reaction mixture was partitioned between ethyl acetate and water. The organic layer was separated, washed with a 1N aqueous solution of sodium hydroxide and brine, dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. The resultant residue was purified by silica gel column chromatography (Fuji Silysia NH, eluent; ethyl acetate, then ethyl acetate:methanol = 95:5), and fractions containing the target compound were concentrated under reduced pressure. To the resultant residue was added diethyl ether:heptane = 1:2 to precipitate a solid. The solid was collected by filtration and dried under aeration to provide the titled compound as white powder (93.4 mg, 63 percent). 1H-NMR Spectrum (CDCl3) delta (ppm): 1.45-1.60 (2H, m), 1.66-1.76 (4H, m), 1.90-1.98 (2H, m), 2.34 (3H, s), 2.42-2.72 (9H, m), 2.95 (2H, m), 4.12 (2H, m), 7.00-7.10 (3H, m), 7.38 (1H, brs), 7.44-7.55 (2H, m), 7.62 (1H, s), 8.27 (1H, dd, J = 6.8, 12.0 Hz), 8.33 (1H, s), 8.67 (1H, brs), 9.47 (1H, brs). ESI-MS (m/z): 653 [M+H]+.

As the paragraph descriping shows that 53617-36-0 is playing an increasingly important role.

Reference：
Patent; Eisai R&D Management Co., Ltd.; EP1889836; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.53617-36-0,1-Methyl-4-(piperidin-4-yl)piperazine,as a common compound, the synthetic route is as follows.,53617-36-0

(Example 32) N-(4-Fluorophenyl)-N’-(4-{[2-({[4-(4-methylpiperazin-1-yl)piperidin-1-yl]carbonyl}amino)pyridin-4-yl]oxy}phenyl)cyclopropane-1,1-dicarboxamide To a solution of [4-(4-{[1-(4-fluorophenylcarbamoyl)cyclopropanecarbonyl]amino}phenoxy)pyridin-2-yl]-N-(phenoxycarbonyl)carbamic acid phenyl ester (50 mg) in N,N-dimethylformamide (1.0 ml) was added 1-methyl-4-(piperidin-4-yl)piperazine (56.7 mg) at room temperature, followed by stirring overnight. The reaction mixture was partitioned between ethyl acetate and water. The organic layer was washed with a saturated aqueous solution of ammonium chloride and brine in this order, and dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. The resultant residue was purified by silica gel column chromatography (Fuji Silysia NH, eluent; ethyl acetate, then ethyl acetate:methanol = 95:5). Fractions containing the target compound were concentrated under reduced pressure. A solid was precipitated by addition of diethyl ether:heptane = 1:3 to the resultant residue. The solvent was removed under reduced pressure. The solid residue was dried under reduced pressure to provide the titled compound as white powder (37.7 mg, 79 percent). 1H-NNR Spectrum (CDCl3) delta (ppm): 1.40-1.94 (9H, m), 2.28 (3H, s), 2.30-2.70 (8H, m), 2.88 (2H, m), 4.02-4.14 (2H, m), 6.54 (1H, dd, J = 2.4, 5.6 Hz), 7.00-7.10 (4H, m), 7.23 (1H, brs), 7.45-7.60 (5H, m), 8.03 (1H, d, J = 5.6 Hz), 8.89 (1H, brs), 9.12 (1H, brs). ESI-MS (m/z): 616 [M+H]+.

As the paragraph descriping shows that 53617-36-0 is playing an increasingly important role.

Reference：
Patent; Eisai R&D Management Co., Ltd.; EP1889836; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

53617-36-0, 1-Methyl-4-(piperidin-4-yl)piperazine is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

53617-36-0, 3h) (R)-1-(4-methyl-2-oxo-2,3-dihydro-benzoxazol-6-ylmethyl -2-[4-(4-methyl-piperazin-1-yl)-piperidin-1-yl]-2-oxo-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate A solution of 510 mg (1.0 mmol) (R)-1-carboxy-2-(4-methyl-2-oxo-2,3-dihydrobenz-oxazol-6-yl)-ethyl 4-(2-oxo-1,2,4,5,-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate, 365 mg (1.12 mmol) TBTU, 230 muL (1.31 mmol) ethyldiisopropylamine in 80 mL THF was stirred for 30 min at RT, then combined with 210 mg (1.12 mmol) 1-methyl-4-piperidin-4-yl-piperazine and stirred for 22 h at RT. To complete the reaction the mixture was again combined with 100 mg (0.3 mmol) TBTU and 50 mg (0.27 mmol) 1-methyl-4-piperidin-4-yl-piperazine and 40 mL THF and stirred for a further 4 h at RT. The reaction solution was diluted with 250 mL EtOAc and extracted twice with 60 mL saturated NaHCO3 solution. The organic phase was dried over Na2SO4, filtered and evaporated down i.vac. The residue was purified by chromatography (Alox, DCM/MeOH 50:1 to 25:1), the fractions containing the product were combined, evaporated down i.vac., combined with diethyl ether, filtered off and dried. Yield: 440 mg (65percent of theory) ESI-MS: (M+H)+=674 Rf=0.46 (Polygram-Alox, DCM/MeOH 25:1)

The synthetic route of 53617-36-0 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Boehringer Ingelheim International GmbH; US2005/256099; (2005); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.53617-36-0,1-Methyl-4-(piperidin-4-yl)piperazine,as a common compound, the synthetic route is as follows.,53617-36-0

(Example 92) N-(2,5-Difluoro-4-{[2-({[4-(4-methylpiperazin-1-yl)piperidin-1-yl]carbonyl}amino)pyridin-4-yl]oxy}phenyl)-N’-(4-fluorophenyl)cyclopropane-1,1-dicarboxamide N-{4-[(2-Aminopyridin-4-yl)oxy]-2,5-difluorophenyl}-N’-(4-fluorophenyl)cyclopropane-1,1-dicarboxamide (104.0 mg) was dissolved in tetrahydrofuran (1 ml) under a nitrogen atmosphere, and triethylamine (0.0653 ml) and phenyl chloroformate (0.0646 ml) were added dropwise at 0 °C in this order, followed by stirring for 30 min. The reaction mixture was stirred after addition of ethyl acetate (5 ml) and a saturated aqueous solution of sodium hydrogencarbonate (5 ml). The organic layer was separated, washed with brine, and dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. The residue was dissolved in N,N-dimethylformamide (1.0 ml). I-Methyl-4-(piperidin-4-yl)piperazine (172.0 mg) was added at room temperature, followed by stirring at 20 hr and 40 min. The reaction mixture was partitioned between ethyl acetate (10 ml) and a saturated aqueous solution of sodium hydrogencarbonate (5 ml). The organic layer was washed with brine, and dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. To the resultant residue were added ethyl acetate (5 ml) and heptane (5 ml) to precipitate a solid. The solid was collected by filtration. The resultant solid was washed with heptane:ethyl acetate = 1:1, and dried under aeration to provide the titled compound as white powder (89.2 mg, 59 percent). 1H-NMR Spectrum (DMSO-d6) delta (ppm): 1.12-1.32 (2H, m), 1.55-1.67 (4H, m), 1.67-1.74 (2H, m), 2.12 (3H, s), 2.20-2.65 (7H, m), 2.65-2.80 (4H, m), 4.05-4.15 (2H, m), 6.63 (1H, dd, J = 2.4, 5.6 Hz), 7.18 (2H, m), 7.39 (1H, d, J = 2.4 Hz), 7.52-7.62 (3H, m), 8.05-8.15 (1H, m), 8.13 (1H, d, J = 5.6 Hz), 9.24 (1H, s), 9.80 (1H, m), 10.99 (1H, m). ESI-MS (m/z): 652 [M+H]+.

53617-36-0 1-Methyl-4-(piperidin-4-yl)piperazine 795707, apiperidines compound, is more and more widely used in various fields.

Reference：
Patent; Eisai R&D Management Co., Ltd.; EP1889836; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.53617-36-0,1-Methyl-4-(piperidin-4-yl)piperazine,as a common compound, the synthetic route is as follows.

6m) (R)-1-(8-methyl-2,3-dihydro-1,4-benzodioxin-6-ylmethyl)-2-[4-(4-methyl-piperazin-1-yl)-piperidin-1-yl]-2-oxo-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate A solution of 80 mg (0.16 mmol) (R)-1-carboxy-2-(8-methyl-2,3-dihydro-1,4-benzodioxin-6-yl)-ethyl 4-(2-oxo-1,2,4,5-tetrahydro-1,3-benzodiazepin-3-yl)-piperidine-1-carboxylate, 51 mg (0.16 mmol) TBTU, 42 muL (0.30 mmol) triethylamine and 29 mg (0.16 mmol) 1-methyl-4-piperidin-4-yl-piperazine in 1 mL DMF was stirred overnight at RT. The reaction mixture was purified by HPLC, the fractions containing the product were combined and lyophilised. Yield: 60 mg (57percent of theory) ESI-MS: (M+H)+=675 retention time (HPLC): 5.0 min (method A), 53617-36-0

The synthetic route of 53617-36-0 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Boehringer Ingelheim International GmbH; US2005/256099; (2005); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem

53617-36-0, 1-Methyl-4-(piperidin-4-yl)piperazine is a piperidines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(Example 54) N-(2-Fluoro-4-{[2-({[4-(4-methylpiperazin-1-yl)piperidin-1-yl]carbonyl}amino)pyridin-4-yl]oxy}phenyl)-N’-phenylcyclopropane-1,1-dicarboxamide To a solution of [4-(3-fluoro-4-{[1-(phenylcarbamoyl)cyclopropanecarbonyl]amino}phenoxy)pyridin-2-yl]-N-(phenoxycarbonyl)carbamic acid phenyl ester (100 mg) in N,N-dimethylformamide (2.0 ml) was added 1-methyl-4-(piperidin-4-yl)piperazine (114 mg) at room temperature, followed by stirring for 5 hr. The reaction mixture was partitioned between ethyl acetate and water. The organic layer was washed with a saturated aqueous solution of ammonium chloride and brine in this order, and dried over anhydrous sodium sulfate. The solvent was concentrated under reduced pressure. The resultant residue was purified by silica gel column chromatography (Fuji Silysia NH, eluent; ethyl acetate, then ethyl acetate:methanol = 95:5). Fractions containing the target compound were concentrated under reduced pressure. A solid was precipitated by addition of diethyl ether to the resultant residue. The solid was collected by filtration. The solid was dried under aeration to provide the titled compound as white powder (28.3 mg, 30 percent). 1H-NMR Spectrum (CDCl3) delta (ppm): 1.40-2.00 (9H, m), 2.29 (3H, s), 2.35-2.70 (8H, m), 2.89 (2H, m), 4.05-4.15 (2H, m), 6.53 (1H, dd, J = 2.4, 5.6 Hz), 6.90-6.95 (2H, m), 7.15 (1H, m), 7.24 (1H, brs), 7.33-7.40 (2H, m), 7.50-7.55 (2H, m), 7.63 (1H, d, J = 2.4 Hz), 8.05 (1H, d, J = 5.6 Hz), 8.22 (1H, m), 8.94 (1H, brs), 9.09 (1H, brs). ESI-MS (m/z): 638 [M+Na]+.

53617-36-0, The synthetic route of 53617-36-0 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Eisai R&D Management Co., Ltd.; EP1889836; (2008); A1;,
Piperidine – Wikipedia
Piperidine | C5H11N – PubChem